Hilti

Plano,  TX 
United States
http://www.hilti.com
  • Booth: 1135

Hilti is a world-leading manufacturer and supplier of quality, innovative and specialized tools and fastening systems for the professional user. With more than 1,350 highly trained Hilti account managers and engineers throughout North America and an additional 1,100 Hilti employees nationwide, Hilti expertise covers the areas of powder actuated fastening, drilling and demolition, diamond coring and cutting, measuring, firestopping, adhesive and mechanical anchoring, and strut and hanger systems.


 Videos

Hilti CFS-CID MD firestop cast-in device for metal deck

 Show Stoppers

  • Cast-in Firestop for Metal Deck
    Lose the torch! Cutting-edge system creates openings and firestops electrical penetrations in metal deck floors...

  • Creating an opening to run conduits is easier than ever with the new Hilti Cast-in Device for Metal Deck. Lose the torch, firewatch, and extra steps, simply place your device on a flat platform and cut deck.

    Applications & Advantages

    • Opening creation in corrugated metal deck slabs to run conduits
    • Designed to work in composite W3 and W2 floor decks for a wide number of manufacturers
    • Sealing combustible and non-combustible penetrations
    • For slab thicknesses from 2.5” up to 6” from top of the deck
    • Concrete floor assembles rated up to 3 hours 
    • Peace of mind — cast-in devices help remove scope for errors compared to traditional methods
    • Creates an opening with the firestop already included — no coming back for firestopping    required
    • Integrated moisture and smoke seal — no additional backfilling required
    • Steel deck reinforcement or additional shoring may not be needed to support the steel deck as a form during the construction phase
    • Deck is cut after concrete is cured and unlikely interfere with reinforcement
     

  • 12-ton Cordless Crimper
    Universal crimper delivers productivity and accuracy – crimping copper and aluminum conductors up to 750 kcmil...

  • The Hilti NCR 120-A22 is a 12-ton universal crimper that accepts all industry standard 12-ton U style crimping dies and crimps copper / aluminum conductors up to 750 kcmil. This highly productive solution is packed with smart electronics that allow you to crimp more productively and reliably. A pressure sensor monitors the crimping force and provides an audio-visual alert if force is below specifications. With the automated Jaw Retraction, the user can stop the jaws from retracting anytime to start a new crimping application. The NCR 120-A22 accepts all Hilti 22-volt batteries. This highly productive 12-ton universal crimper solution is supported by the unmatched Hilti 20-2-1 tool warranty - 20 years of repair or replacement of defective parts, two years no cost repair including wear and tear, and a guaranteed one-day turn-around on repairs.

    Applications & Advantages

    • Crimping up to 750 kcmil copper and aluminum conductors
    • Crimping grounding connections – Accepts all industry standard grounding dies
    • Tool does not start if there is not enough battery power left to finish a complete crimping cycle
    • 350 degrees head rotation for easy access to narrow crimping applications
    • Full compatibility: Accepts all industry standard 12-ton U style crimping dies
    • Pressure sensor that monitors crimping force and provides audio visual alert in case the force is below specification
    • Jaws retract automatically after completion of the crimping operation
    • Operator can stop the automatic retraction of the blades at any point by pressing the trigger and then starting the next crimping
  • Multiline Green Laser
    Three 360° green beams and fine adjustment deliver productivity and accuracy for interior layout applications...

  • The multiline laser PM 30-MG offers full 360 degrees green horizontal and vertical lines to deliver speed and accuracy for any indoor layout job. The sturdy and easy to adjust magnetic bracket delivers more precision for your multidirectional alignments, and the B12 battery ensures long run times and short charge times. The PM 30-MG sets the bar for electrical, layout applications. It’s also backed by Hilti’s unmatched tool warranty - 20 years of repair or replacement of defective parts, two years no cost repair including wear and tear, and a guaranteed one-day turn-around on repairs.

    Applications & Advantages

    • Layout
    • Squaring and aligning over long distance
    • Increased visibility – the 360° green laser is four times more visible than red
    • Fine adjustment knob for increased productivity when laying out
    • The strong magnetic bracket is easy to use and adjust
    • Align up to 200ft with the PMA 31G receiver
  • Kwik Cast Multi-Thread Anchors & Setting Tool
    Color-coded multi-thread cast-in anchors designed for easy installation and identification in metal deck construction...

  • The KCM-MD anchors were designed to improve the contractor’s productivity when working on metal deck construction. These innovative anchors feature a versatile, multi-thread design to accommodate a variety of rod diameters, and they were designed with multiple color options for the plastic body and plug, which allows the contractor to easily identify specific runs and avoid costly mistakes. These design features can save the contractor hours of time, effort and expense on the jobsite. The pre-installed screws optimize the anchor installation and prevent a contractor from having to fumble around with loose screws on the jobsite to attach the anchors to the metal deck. The long plate anchors were designed to give the contractor ultimate flexibility by providing multi-thread capability and the ability to install at any point on the metal deck. Installation of these anchors is made fast and easy with the KCM-MD Combo Bit, which provides an impact-ready stepper drill bit coupled with a nut setter for setting the screws. The combo bit allows the user to drill a hole in the deck with ease, and then remove the stepper drill bit to set the screws on the anchor with a nut setter. One tool for the installation, which makes it simple.

    Applications & Advantages

    • Cast-in-place anchoring for electrical hanging applications
    • Pre-installed screws for quicker installation
    • Color coded plugs for easy identification
    • Smaller diameter hole required in deck for quicker installation
    • Long plate anchor with multi-thread design allows for installation at any point on the deck
  • 12-ton Cordless Copper and Aluminum Cutter
    Combining smart electronics with large-diameter cutting performance, up to 3-3/8” O.D. copper and aluminum conductors...

  • The Hilti NCT 85-A22  is designed to cut a large variety of copper and aluminum conductors with a maximum outside diameter of 3-3/8 inches, which makes it ideal for crews working on underground distribution or in telecommunications. Smart electronics in the tool automatically stops the jaws in case the conductor density is too high, helping prevent damages to the blades and tool. The 350 degrees head rotation makes it easy to access narrow applications. The NCT 85-A22 accepts all Hilti 22-volt batteries and is backed by the unmatched Hilti 20-2-1 tool warranty – 20 years of repair or replacement of defective parts, two years no cost repair including wear and tear, and a guaranteed one-day turn-around on repairs.

    Applications & Advantages

    • Cutting large diameter Copper & Aluminum wire – up to 3-3/8” O.D
    • Tool does not start if there is not enough battery power left to finish a complete cutting cycle
    • Audio-visual signals to warn the operator if press cycle not completed
    • Blades retract automatically when the cutting cycle is complete
    • Operator can stop automatic retraction of the blades at any point by pressing the trigger and then starting the next cutting
    • Two-stage hydraulic system provides fast advance of the blades
  • 22V Cordless Area Light
    Light up the jobsite, cord-free. Multifunction, 3000 lumens of smooth, even light while staying cool...

  • Cords, positioning, and shadows are a problem of the past with the cordless area light SL 6-A22. This light keeps the heat down, productivity up, and shadows to a minimum with the specially designed optics, which produces smooth even light with soft edges. It’s packed with functionality: it stands, hangs, and rotates both horizontally and vertically. This cordless area light delivers professional lighting to a rugged jobsite. It’s covered by an industry-best warranty - 20 years of repair or replacement of defective parts, two years no cost repair including wear and tear, and a guaranteed one-day turn-around on repairs.

    Application & Advantages

    • LED panel outputs 3000 lumens of light while staying cool to the touch
    • Specially designed professional optic limits stray light to minimize glare for those not directly using the light
    • Brightness modes (100%, 66%, 33%) with memory function to return to previous setting when powering on
    • Foot/base design allows for hanging or mounting from a variety of jobsite surfaces including pipes, scaffolding, boards, etc.
    • Horizontal and vertical rotation of light head gives a variety of options to illuminate your work area
    • Standard 5/8” thread allows for attachment to tripods, stands, and mounts
    • Natural white light clearly illuminates dark work areas with high color accuracy
  • Power Driver
    Easy and robust solution for safely driving ground rods without the need for ladders...

  • The TE PD is an easy and effective solution for driving ground rods. Other power driver options can be too bulky or deform the copper rod but, Hilti’s new power driver eliminates the use of a ladder and is less likely to damage the copper rod.

    Applications & Advantages

    • Grounding and earthing applications
    • Power rod driving
    • Safer and easier assembly of the Hilti power ground rod driving system
    • Compatible with a broad range of power diameters
    • Easier handling thanks to adaptive attachment mechanism
  • 36V Cordless SDS Max Combihammer
    Tackle the most demanding applications; drilling, chipping and driving, in less time...

  • Powered by the strongest and highest capacity battery available, the TE 60-A36 drills faster than any corded combihammer in the same size class on the market. It delivers up to twice the work per charge as current competitor cordless solutions, allowing users to get the most demanding jobs done even faster. It’s a highly versatile tool and the perfect solution for a variety of applications beyond drilling and breaking, including corrective chiseling, driving ground rods, digging and tamping in narrow spaces and coring in masonry and concrete with Hilti core bits. In addition to a brushless motor for high performance and efficiency, it comes with Active Vibration Reduction (AVR), and Active Torque Control (ATC) that helps protect the user, tool and insert. The tool is OSHA 1926.1153 Table 1 compliant when used with dust removal systems TE DRS-Y, TE DRS-D and a Hilti vacuum cleaner. It’s also backed by Hilti’s industry-leading 20-2-1 warranty - 20 years of repair or replacement of defective parts, two years no cost repair including wear and tear, and a guaranteed one-day turn-around on repairs.

    Applications & Advantages

    • Light breaking and corrective chiseling applications
    • Driving ground rods
    • Digging and tamping in narrow spaces
    • Drilling anchor and through-holes in concrete (up to 2”) and masonry (recommended diameter range ¾” to 3”) Coring in masonry and concrete with TE-Y BK core bits up to 4-15/16” diameter
    • High versatility for a wide range of drilling and chiseling applications
    • Highly productive combihammer for demanding applications that usually require a corded tool
    • High versatility for a wide range of drilling and chiseling applications
    • Brushless motor for exceptionally high performance and superior system efficiency
    • Active Torque Control (ATC) stops the tool if the drill bit jams and the housing to rotate too quickly
    • OSHA 1926.1153 Table 1 compliant when used with the TE DRS-Y or TE DRS-D dust removal system and a Hilti vacuum cleaner

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


For Technical Support with this webpage, please contact support

2020 LOCATION & Dates
Sun. Oct. 4 - Tues Oct. 6, 2020
Lakeside Center - McCormick Place
Chicago, IL

2020 Exh. Prospectus
2020 Floorplan
2020 Sign-Up Here

FUTURE DATES
2020: Chicago Oct. 3-6
2021: Nashville Oct. 9-12
2022: Austin Oct. 15 - 18
2023: Philadelphia Sept. 29 - Oct. 2

2024: San Diego Sept.28 - Oct. 1